Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
- 9. A steering
9.1. A technical characteristics
+ 9.2. Service and repair
+ 9.3. A steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
9. A steering
9.1. A technical characteristics
| THE GENERAL DATA |
The design description
The steering system has реечную steering transfer.
The safe steering column has a two-piece shaft of a steering wheel with the crosswise hinge, and also the deformable casing of a shaft fixed under the forward panel and compressed in case of a head-on collision.
| Transfer number |
20
|
| Number of turns of a steering wheel (from an emphasis against the stop) |
4,15
|
| Diameter of a turn |
11 m
|
| The moment of resistance during turn of a wheel of steering transfer |
0,8 – 0,14 Nanometers
|
The tightening moments
| Fastening of the case of steering transfer to a body cross-beam: | |
| – 1st stage |
15 Nanometers
|
| – 2nd stage |
To tighten on 90 °
|
| The spherical hinge of steering bent for to a rotary fist |
25 – 30 Nanometers
|
| Flange of the elastic hinge to steering transfer |
20 – 25 Nanometers
|
| Cover приводной gear wheels |
17 – 24 Nanometers
|
| Pusher cover to the case of steering transfer |
6 – 9 Nanometers
|
| Steering bent for gear рейке |
75 – 85 Nanometers
|
|
Hinge flange to a steering wheel shaft |
20 – 25 Nanometers
|
| The top holder of a steering column |
45 – 55 Nanometers
|
| Steering wheel nut |
45 – 55 Nanometers
|
| Wheel nut |
100 Nanometers
|