FORD SCORPIO

1985-1994 of release

Repair and car operation

9.2.6. Removal and installation of a steering column

THE GENERAL DATA

Steering column

Bolts of fastening of an arm of adjustment of a steering wheel on height

Fastening bolts are specified by arrows.

Removal

PERFORMANCE ORDER

1. To establish car wheels in position for advance. 2. To remove top and bottom a casing of a steering column. For removal of the top part of a casing to establish in the bottom position the device of adjustment of a steering column on height. 3. To unscrew a coupling bolt of a connecting flange of a steering shaft. 4. To remove the lever of opening of the lock of a cowl and to disconnect a cable of the lock of a cowl from a steering column. 5. To disconnect sockets of electric wires from the universal switch, the switch of ignition and a sound signal. 6. To remove the central nozzle of system of ventilation. 7. To remove the left bottom overlay of the panel of devices. 8. To remove the block of auxiliary control bulbs. 9. To unscrew three bolts of fastening of an arm of the device of adjustment of a steering column on height. 10. To take knot of a steering column.

Installation

PERFORMANCE ORDER

1. To check up correctness of position of the wheels established for advance. 2. To establish on a corresponding place a steering column, without tightening a nut of its fastening. 3. To establish the lever of opening of the lock of a cowl. 4. To connect sockets of electric wires. 5. To establish top and bottom a casing of a steering column. 6. To connect a steering shaft with приводной a gear wheel. 7. To check up symmetry of position of a steering wheel at installation of wheels for advance.