FORD SCORPIO

1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
- 2. Maintenance service
   2.1. Periodicity of service of cars
   2.2. Each 10 000 km or once a year
   2.3. Each 40 000 km
   2.4. Each 60 000 km or in 2 years
   2.5. Check of level of engine oil
   2.6. Engine oil and filter replacement
   2.7. Places of possible leaks of engine oil and their definition
   2.8. Check of level and replacement of a cooling liquid
   2.9. Check of tightness of system of cooling
   2.10. Spark plugs
   2.11. Replacement of the air filter
   2.12. Replacement of the fuel filter
   2.13. Replacement of the valve of ventilation картера the engine
   2.14. Liquid check in air central air
   2.15. Check of level of oil in a transmission
   2.16. Check of level of oil in the back bridge
   2.17. Check of a condition of a protective cover of a power shaft
   2.18. Adjustment of a brake tape in an automatic transmission
   2.19. Check of a condition forward and back brake колодок
   2.20. Check of level and replacement of a brake liquid
   2.21. Check of a condition of a suspension bracket
   2.22. Check of level of a liquid in system of the amplifier of a steering
   2.23. Clearing of a drain for a condensate formed at work of the conditioner
   2.24. Recommendations about engine oils
   2.25. Specifications
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment

2.20. Check of level and replacement of a brake liquid

THE GENERAL DATA

The prevention
The brake liquid is very poisonous, and also can damage the painted surfaces.

At replacement of a brake liquid it is necessary to have not less than two litres of a fresh brake liquid.

PERFORMANCE ORDER

1. To establish the car on an equal horizontal platform.

2. To switch off ignition and to press against the stop a brake pedal (about 20 times) while it does not become "firm".

3. To open a cowl, to include ignition, the pump of hydraulic knot thus will join and after a pump stop to switch off ignition.

4. To check up level of a brake liquid which should be between marks MIN and MAX.

5. To unscrew one screw of removal of air on a wheel and softly to swing a brake pedal that almost all old liquid has been removed from the main brake cylinder. Thus constantly to add a fresh brake liquid in a tank, that not завоздушить brake system.

6. Similarly to remove an old brake liquid from other wheels.

7. After performance of this work to tighten screws of removal of air and to establish on them protective caps, and also check up level of a brake liquid in a tank. To check up work of brakes in movement.