FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
- 2. Maintenance service
   2.1. Periodicity of service of cars
   2.2. Each 10 000 km or once a year
   2.3. Each 40 000 km
   2.4. Each 60 000 km or in 2 years
   2.5. Check of level of engine oil
   2.6. Engine oil and filter replacement
   2.7. Places of possible leaks of engine oil and their definition
   2.8. Check of level and replacement of a cooling liquid
   2.9. Check of tightness of system of cooling
   2.10. Spark plugs
   2.11. Replacement of the air filter
   2.12. Replacement of the fuel filter
   2.13. Replacement of the valve of ventilation картера the engine
   2.14. Liquid check in air central air
   2.15. Check of level of oil in a transmission
   2.16. Check of level of oil in the back bridge
   2.17. Check of a condition of a protective cover of a power shaft
   2.18. Adjustment of a brake tape in an automatic transmission
   2.19. Check of a condition forward and back brake колодок
   2.20. Check of level and replacement of a brake liquid
   2.21. Check of a condition of a suspension bracket
   2.22. Check of level of a liquid in system of the amplifier of a steering
   2.23. Clearing of a drain for a condensate formed at work of the conditioner
   2.24. Recommendations about engine oils
   2.25. Specifications
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c



2.21. Check of a condition of a suspension bracket
PERFORMANCE ORDER
Check of a forward suspension bracket
1. To lift a forward part of the car and to fix on supports.
2. On cars with the steering amplifier to check up a condition of hoses and their connection.
3. To shake a wheel in vertical and horizontal planes for definition люфта. At presence люфта to define its source.
4. To continue to swing a wheel while the assistant presses a foot brake. If люфт disappears or considerably decreases, it is probable that nave bearings are worn out. If люфт by pressing of a pedal of a brake does not change, means, there is a deterioration in suspension bracket elements.
5. At presence люфта in a horizontal plane deterioration spherical шарнирных connections of steering draught is possible.
Check of a back suspension bracket
6. To lift a back part of the car and to fix on supports.
7. To check up a condition of protective covers of hinges of equal angular speeds.
8. To check up bearings, plugs of a suspension bracket and shock-absorber installation on deterioration. The deterioration control in nave bearings is made by rocking of the lifted wheel.
9. To check up shock-absorbers on presence of leaks of an amortisation liquid.
10. To establish the car on the earth, and pressing a body and sharply releasing it, to check up work of shock-absorbers. At normally working shock-absorbers the car should shake only once, otherwise it is necessary to check up a condition of shock-absorbers at the stand, and if necessary to replace.