Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
- 3.1. Engine OHC
3.1.1. A technical characteristics
- 3.1.2. Service and repair
3.1.2.1. Engine adjustment
+ 3.1.2.2. The repair which is not demanding removal of the engine
3.1.2.3. Removal and engine installation
- 3.1.2.4. Engine repair
3.1.2.4.1. Engine dismantling
3.1.2.4.2. Identification of co-operating parts
3.1.2.4.3. Engine assemblage
3.1.2.4.4. Replacement of pistons
3.1.2.4.5. Removal and installation of an intermediate shaft
3.1.2.4.6. System газораспределения
3.1.2.4.7. Start of the engine after major repairs
3.1.2.5. Greasing system
3.1.2.6. Ventilation system картера
+ 3.2. Engine DOHC
+ 3.3. Engine V6
+ 3.4. Ignition and engine management systems
+ 3.5. Diesel engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
3.1.2.4.2. Identification of co-operating parts
| THE GENERAL DATA |
Labels on radical bearings specifying in the nest of the loose leaf increased by 0,1 mm
| Labels are specified by arrows. |
Labels of a designation of the size of bearings of a cranked shaft
Diameters of nests of radical bearings
|
The nominal sizes
|
Without designations
|
|
The repair sizes of +0,10 mm
|
Designation a white paint on covers of radical bearings
|
Radical necks
|
The nominal sizes
|
Without designations
|
|
The repair sizes-0,25 mm
|
Designation a green paint on a shoulder of the nearest knee, to a radical neck of the reduced diameter
|
Shatunnye necks
|
The nominal sizes
|
Without designations
|
|
The repair sizes-0,25 mm
|
The colour sign executed on a shoulder of the nearest knee, to a radical neck of the reduced diameter
|
|
The prevention
| |
Cranked shaft in which necks and loose leaves as radical, and Shatunnye loose leaves
Shatunnye loose leaves of the repair sizes are designated on an external surface.