Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
- 3.1. Engine OHC
3.1.1. A technical characteristics
- 3.1.2. Service and repair
3.1.2.1. Engine adjustment
- 3.1.2.2. The repair which is not demanding removal of the engine
3.1.2.2.1. Removal and installation of a gear belt
3.1.2.2.2. Removal of a head of the block of cylinders
3.1.2.2.3. Dismantling and assemblage of a head of the block of cylinders
3.1.2.2.4. Installation of a head of the block of cylinders
3.1.2.2.5. Removal and installation of the oil pallet
3.1.2.2.6. Replacement of a forward sealing ring of a cranked shaft
3.1.2.2.7. Replacement of a back sealing ring of a cranked shaft
3.1.2.2.8. Replacement of support of the engine
3.1.2.3. Removal and engine installation
+ 3.1.2.4. Engine repair
3.1.2.5. Greasing system
3.1.2.6. Ventilation system картера
+ 3.2. Engine DOHC
+ 3.3. Engine V6
+ 3.4. Ignition and engine management systems
+ 3.5. Diesel engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
3.1.2.2. The repair which is not demanding removal of the engine
| THE GENERAL DATA |
On the engine established in the car, it is possible to execute following operations:
– Removal and installation of a gear belt;
– Removal and installation of a head of the block of cylinders;
– Removal and camshaft installation;
– Removal and installation of an intermediate shaft;
– Removal and installation of forward support of the engine;
– Removal and installation oil картера;
– Removal and installation шатунных bearings, pistons and rods;
– Removal and installation of sealing rings of a cranked shaft;
– Removal and flywheel installation.