FORD SCORPIO

1985-1994 of release

Repair and car operation


Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   - 3.2. Engine DOHC
      3.2.1. A technical characteristics
      - 3.2.2. The repair which is not demanding removal of the engine
         3.2.2.1. A chain газораспределительного the mechanism and asterisks
         + 3.2.2.2. A head of the block of cylinders
         3.2.2.3. Removal and installation of a back sealing ring of a cranked shaft
      + 3.2.3. Removal and installation of the engine without a transmission
      3.2.4. Ventilation system картера
      + 3.2.5. Greasing system
   + 3.3. Engine V6
   + 3.4. Ignition and engine management systems
   + 3.5. Diesel engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c


3.2.2.3. Removal and installation of a back sealing ring of a cranked shaft
THE GENERAL DATA

Special оправка for installation of a back sealing ring of a cranked shaft

And – a back cover,

In – the special tool

PERFORMANCE ORDER
1. To remove a transmission.
2. To remove coupling.
3. To remove a flywheel and a protective guard of the engine.
4. For extraction of a back sealing ring of a cranked shaft to drill in a ring two small apertures, to screw in in them two self-cutting screws and пассатижами for heads of self-cutting screws to extend a sealing ring.
5. To clear a nest of a sealing ring.
6. To grease working edges of a new sealing ring with fresh engine oil and by means of special оправки, to establish it in a nest working edges inside.
7. To establish a flywheel.