FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   - 3.2. Engine DOHC
      3.2.1. A technical characteristics
      - 3.2.2. The repair which is not demanding removal of the engine
         3.2.2.1. A chain газораспределительного the mechanism and asterisks
         - 3.2.2.2. A head of the block of cylinders
            3.2.2.2.1. Removal of a head of the block of cylinders
            3.2.2.2.2. Dismantling and assemblage of a head of the block of cylinders
            3.2.2.2.3. Check of a head of the block of cylinders
            3.2.2.2.4. Check of directing plugs of valves
            3.2.2.2.5. Processing of saddles of valves in a head of the block of cylinders
            3.2.2.2.6. Grinding in
            3.2.2.2.7. Assemblage of a head of the block of cylinders
            3.2.2.2.8. Installation of a head of the block of cylinders
         3.2.2.3. Removal and installation of a back sealing ring of a cranked shaft
      + 3.2.3. Removal and installation of the engine without a transmission
      3.2.4. Ventilation system картера
      + 3.2.5. Greasing system
   + 3.3. Engine V6
   + 3.4. Ignition and engine management systems
   + 3.5. Diesel engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c



3.2.2.2. A head of the block of cylinders
THE GENERAL DATA

Details of a head of the block of cylinders

1 – a head of the block of cylinders,
2 – inlet valves,
3 – final valves,
4 – a lining of a head of the block of cylinders,
5 – hydraulic pushers of valves,
6 – crackers,
7 – the top plate of a spring,
8 – a spring,
9 – маслоотражательные caps,
10 – the bottom plate of a spring,
11 – a saddle of the inlet valve,
12 – a saddle of the final valve,
13 – bolts of fastening of a cover of bearings of camshafts,
14 – a hairpin,
15 – a nut,
16 – маслоналивная a stopper,
17 – bolts of fastening of a cover of a head of the block of cylinders,
18 – a sealing ring of the intensifying plug,
19 – the intensifying plug,
20 – a lining of a cover of a head of the block of cylinders,
21 – a bolt,
22, 23 – an arm,
24 – a bolt,
25 – a directing pin,
26 – a cover of a head of the block of cylinders