FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
- 10. Suspension brackets
   - 10.1. A forward suspension bracket
      10.1.1. A technical characteristics
      - 10.1.2. Service and repair
         10.1.2.1. A beam of a forward suspension bracket
         10.1.2.2. Removal and installation of a rack of a forward suspension bracket
         10.1.2.3. Dismantling and assemblage of a rack of a suspension bracket
         10.1.2.4. Removal and stabilizer installation
         10.1.2.5. Replacement металлорезиновой lever plugs
         10.1.2.6. Removal and installation of a rotary fist
         10.1.2.7. Installation of forward wheels
         10.1.2.8. Replacement of bearings of a nave of a wheel
   + 10.2. A back suspension bracket
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c



10.1.2.4. Removal and stabilizer installation

Removal

PERFORMANCE ORDER
1. To remove clamps and to unscrew 4 bolts of fastening of the stabilizer to a body.
2. To lift a forward part of the car and to unscrew nuts of fastening of the stabilizer to the bottom cross-section levers of a suspension bracket, to take forward metal washers and forward металлорезиновые plugs.
3. To unscrew from both parties of a suspension bracket a nut of a bolt of fastening of the cross-section lever to an engine mount cross-beam.
4. To remove levers from a body and to take the stabilizer, to remove from the stabilizer back rubber rings and back металлорезиновые plugs.

Installation

PERFORMANCE ORDER
1. To establish the suspension bracket stabilizer, carrying out actions in return sequence in relation to removal process.
2. Nuts of bolts of fastening of levers of a suspension bracket to an engine mount cross-beam should be tightened, only having lowered the car.