FORD SCORPIO

1985-1994 of release

Repair and car operation


Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Forward brakes
   + 11.3. Back brakes
   11.4. Adjustment of a manual brake
   11.5. Removal of air from brake system
   - 11.6. Antiblocking system
      11.6.1. Functioning check
      11.6.2. Removal and installation of hydraulic knot of management
      11.6.3. Removal and installation of a brake pedal
      11.6.4. Removal and installation of the accumulator of hydraulic knot
      11.6.5. Removal and installation of the pump and the engine of hydraulic knot
      11.6.6. Replacement of the gauge of speed of rotation of a forward wheel
      11.6.7. Replacement of the gauge of speed of rotation of a back wheel
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c


11.6.4. Removal and installation of the accumulator of hydraulic knot
PERFORMANCE ORDER
1. To remove a negative wire from the accumulator.
The prevention

To remove pressure in the hydraulic accumulator of brake system. For this purpose it is necessary to switch off ignition and to press against the stop a brake pedal (about 20 times) while it does not become "firm".
2. To lay rags about the basis of the accumulator of hydraulic knot for gathering of the spilt brake liquid.
3. To unscrew the accumulator, using face шестигранный a wrench, and to remove the accumulator (the arrow notes a sealing ring of round section which is subject to replacement).
4. To establish a new sealing ring of round section and to establish and fix the accumulator.
5. To connect the storage battery and to include ignition. The pump of hydraulic knot should start to work and be switched off within 60 seconds, otherwise it is necessary to search for malfunction in the accumulator of hydraulic knot.
6. To remove air from brake system.