FORD SCORPIO

1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Forward brakes
   + 11.3. Back brakes
   11.4. Adjustment of a manual brake
   11.5. Removal of air from brake system
   - 11.6. Antiblocking system
      11.6.1. Functioning check
      11.6.2. Removal and installation of hydraulic knot of management
      11.6.3. Removal and installation of a brake pedal
      11.6.4. Removal and installation of the accumulator of hydraulic knot
      11.6.5. Removal and installation of the pump and the engine of hydraulic knot
      11.6.6. Replacement of the gauge of speed of rotation of a forward wheel
      11.6.7. Replacement of the gauge of speed of rotation of a back wheel
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment

11.6.6. Replacement of the gauge of speed of rotation of a forward wheel Removal

PERFORMANCE ORDER

1. To weaken nuts of fastening of a corresponding forward wheel.

2. To lift the car and to remove a wheel.

3. To unscrew bolts of fastening of the gauge of rotation.

4. To disconnect from the rotation gauge an electric socket.

5. To take the gauge (it is specified by an arrow).

6. To unhook a wire of the gauge from spring скоб.

Installation

PERFORMANCE ORDER

1. To clear a nest of fastening of the gauge of speed of rotation of a wheel of a dirt, rust traces etc.

2. Slightly to grease a nest of fastening of the gauge with greasing for bearings.

3. To establish a new sealing ring of round section on the gauge.

4. To establish the gauge of speed of rotation in its nest.

5. To tighten a bolt of fastening of the gauge.

6. To connect to the gauge an electric socket and to hook on an electric wire in spring скобах.

7. To establish a wheel and to lower the car.

8. To tighten nuts of fastening of a wheel the corresponding moment.