Adjustment of height of installation of a forward bumper
1 – a tightening nut,
2 – a blocking bolt,
3 – the carving plug,
4 – a bumper,
5 – an adjusting bolt
The height of installation of a forward bumper is made by means of two adjusting bolts located in forward support.
PERFORMANCE ORDER
1. A key of "Togh" to weaken lock bolts.
2. To expose a bumper on the demanded height, rotating adjusting bolts of 24 mm a replaceable head. The bumper height is adjusted truly when the backlash between its top and a bottom edge of lateral sections of a lattice of a radiator is equal 7 mm.
3. After installation of height of a forward bumper to tighten lock bolts.