FORD SCORPIO

1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   - 13.4. External elements of a body
      13.4.1. Removal and installation of the cylinder of the lock of a mouth of a gulf of fuel
      13.4.2. Removal and installation of a cover of the hatch
      13.4.3. Removal and installation of a windscreen and motionless glasses
      13.4.4. Removal and installation of decorative overlays of a windscreen
      13.4.5. Removal and installation of decorative overlays of glass of a back door
      13.4.6. Removal and installation of emblems
      13.4.7. Adjustment of height of installation of a forward bumper
      13.4.8. Removal and installation of bumpers
      13.4.9. Removal and installation of overlays of a bumper
      13.4.10. Removal and installation of a forward spoiler
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment

13.4.8. Removal and installation of bumpers

PERFORMANCE ORDER

1. To lift accordingly a forward or back part of the car and to fix on supports.

Forward bumper

2. To disconnect lateral clips (arrow), having turned them on 90 °. To release a cross-section emphasis, having pulled them from a bumper.

3. A key of "Togh" completely to unscrew lock bolts, then 24 mm a replaceable head to unscrew adjusting bolts.

4. To pull a bumper forward from the car and to remove it.

5. Installation is made in sequence, return to removal. It is obligatory to adjust height of installation of a bumper.

Back bumper

6. To disconnect lateral clips, having turned them on 90 °.

7. To unscrew two screws "Тогх", крепящие a back bumper to support.

8. To disconnect wires of illumination of licence plate and to take them from a bumper.

9. To pull a bumper back from the car and to remove it.

10. Installation is made in sequence, return to removal.

11. To adjust basic скобы so that distance between a bumper and the top surface скобы 111 mm equaled.

12. To lower the car.