FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   - 13.3. Doors
      13.3.1. Removal and installation of doors
      13.3.2. Adjustment of position of a door
      13.3.3. Removal and installation of the panel of an internal upholstery of doors
      13.3.4. Removal and installation of external handles of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a sealant of a door
      13.3.8. Removal and installation of glasses of a door
      13.3.9. Removal and mechanism installation стеклоподъемника
      13.3.10. Removal and installation of decorative lateral overlays of doors
      13.3.11. Removal and installation of decorative overlays of a frame of glasses of a door
      13.3.12. Removal and installation of external rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a luggage carrier
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation газонаполненного an emphasis of a door of a luggage carrier
      13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)
      13.3.18. Removal and installation of the lock of a cover of a luggage carrier (model Salon)
   + 13.4. External elements of a body
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


59ff046c



13.3. Doors

13.3.1. Removal and installation of doors
PERFORMANCE ORDER
1. To open a door and to disconnect an electric socket (it is specified by an arrow) from a door pillar.
2. As much as possible to open a door and to unscrew the terminator of opening of doors.
3. To unscrew on some turns of a nut of fastening of a door.
4. To open a door at an angle 60 ° to a body of the car and to remove it from loops.
5. Installation is made in sequence, return to removal.
6. If the new door is established, it is necessary to weld on it new loops.
7. Adjustment of position of a door is made by moving запорного a door finger.