FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   + 3.2. Engine DOHC
   + 3.3. Engine V6
   + 3.4. Ignition and engine management systems
   - 3.5. Diesel engines
      3.5.1. A technical characteristics
      3.5.2. The repair which is not demanding removal of the engine
      3.5.3. Check and adjustment of backlashes of valves
      + 3.5.4. Fuel system
      + 3.5.5. A head of the block of cylinders
      3.5.6. Removal and engine installation
      + 3.5.7. Dismantling, repair and engine assemblage
      3.5.8. Турбокомпрессор
      + 3.5.9. Greasing system
      - 3.5.10. Cooling system
         3.5.10.1. Plums of a liquid from cooling system
         3.5.10.2. Filling of system and air removal
         3.5.10.3. The fan
         3.5.10.4. Removal and installation муфты the fan
         3.5.10.5. The thermostat
      3.5.11. Typical malfunctions of the engine
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c



3.5.10.4. Removal and installation муфты the fan
THE GENERAL DATA

Муфта the cooling fan

1 – a contact brush,
2 – a contact ring,
3 – приводной a belt,
4 – the coil,
5 – blades of the fan,
6 – a bolt and a nut of fastening of blades of the fan,
7 – a central nut,
8 – an axis,
9 – the bearing,
10 – an adjusting bolt,
11 – an air backlash,
12 – grounding,
13 – the bearing,
14 – a cover of a drive of the mechanism газораспределения

PERFORMANCE ORDER
1. To merge cooling liquid from system.
2. To disconnect branch pipes from a radiator and to remove a radiator.
3. To remove приводной a fan belt.
4. To fix a m pulley to unscrew the central nut of an axis of the fan.
5. Easy blows киянки on a pulley and муфте to remove electromagnetic муфту.
6. To uncover a mechanism drive газораспределения, to remove a lock spring ring and to take an axis of the fan with bearings.
7. It is established муфта in sequence of return to removal.