FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   + 3.2. Engine DOHC
   + 3.3. Engine V6
   + 3.4. Ignition and engine management systems
   - 3.5. Diesel engines
      3.5.1. A technical characteristics
      3.5.2. The repair which is not demanding removal of the engine
      3.5.3. Check and adjustment of backlashes of valves
      + 3.5.4. Fuel system
      + 3.5.5. A head of the block of cylinders
      3.5.6. Removal and engine installation
      - 3.5.7. Dismantling, repair and engine assemblage
         3.5.7.1. Dismantling
         + 3.5.7.2. Engine assemblage
      3.5.8. Турбокомпрессор
      + 3.5.9. Greasing system
      + 3.5.10. Cooling system
      3.5.11. Typical malfunctions of the engine
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


59ff046c



3.5.7. Dismantling, repair and engine assemblage

3.5.7.1. Dismantling
THE GENERAL DATA

Elements of fastening of the oil pump


PERFORMANCE ORDER
1. To fix the engine on a corresponding bed, to merge oil and to remove the oil filter.
2. To remove the vacuum pump and клиновой a drive belt; to unscrew the vacuum pipeline.
3. To remove completely the generator (together with the holder) and приводные клиновые belts, a roller of the tension device клинового a belt of the pump of a cooling liquid and a belt.
4. To unscrew from a head of the block of cylinders the thermostat of a regulator of the increased number of turns of idling, then to unscrew return fuel hoses and to remove the fuel pump.
5. To unscrew and remove fuel pipelines. To muffle corresponding stoppers of an aperture of pipelines and adaptations of fuel system, not to admit hit there a dust.
6. To take atomizers, their linings and a thermoisolation ring, to disconnect an electric wire and токовую the tyre from candles накаливания and to unscrew them.
7. To disconnect the pipeline of giving of oil to an axis of the lever of valves and to unscrew external holders of an axis of the lever of valves.
8. To unscrew bolts of fastening of a head of the block of cylinders (in return sequence in relation to their tightening) and to remove a head and its lining.
9. To remove the holder of the oil filter and an oil radiator, and then to unscrew the fuel pump with its holder.
10. To remove pulleys of a cranked shaft and the fan; to remove a casing of a chain of system газораспределения.
11. To block a screw-driver the tension device of a chain, to remove the device and its clown, to take a system chain газораспределения and an asterisk of the fuel pump.
12. To remove a flange of fastening of a drive of the fuel pump and the pipeline of giving of oil.
13. To pull together an asterisk from a cranked shaft and to remove the tension device приводной system chains газораспределения.
14. To remove from a flywheel a leading part and a coupling disk, the oil pallet, a stopper of the oil pump, a nut and a bolt of fastening of the oil pump, and then to remove the oil pump.
15. To turn the engine on 180 °, to remove from the block of cylinders an intermediate plate, to take a cam-shaft, and then by means of a stripper to remove an asterisk from a cam-shaft.
16. To take pushers and to establish them in sequence with which they occupy in the engine.
17. To designate covers of radical bearings, and also rods and their covers (from outside the fuel pump).
18. To remove covers of radical bearings and a cover of rods.
19. To take a cranked shaft from the block of cylinders of the engine.
20. To take from cylinders pistons together with rods.
21. To arrange loose leaves together with covers in sequence with which they occupied in the engine.