Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
5.1. A technical characteristics
5.2. Fuel
5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
- 5.4. System of giving of air
5.4.1. Removal and installation of the air filter
5.4.2. A temperature regulator
5.4.3. The fuel pump
5.4.4. Replacement of the fuel filter by engines with system of injection of fuel
5.4.5. Removal and installation of a fuel tank
5.4.6. Removal and installation of the gauge of measurement of level of fuel
5.4.7. Removal and installation of the inertial switch of giving of fuel
5.4.8. Removal and installation of a pedal of an accelerator
5.4.9. Removal and installation of a cable of an accelerator
5.4.10. A steam separator
+ 5.5. Carburettor PIERBURG
+ 5.6. Carburettor WEBER 2V
+ 5.7. Carburettor WEBER 2V TLD
+ 5.8. System of injection of fuel
5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
5.4.10. A steam separator
| THE GENERAL DATA |
Fuel steam separator without a pressure regulator
| 1 – a returnable fuel hose, 2 – a submitting fuel hose, 3 – fuel giving in the carburettor |
Fuel steam separator with a pressure regulator
| 1 – a submitting fuel hose, 2 – a returnable fuel hose, 3 – fuel giving in the carburettor |
Carburettor models are equipped by the steam separator, established on the left forward internal wing. On models 1,8 дм3 the separator includes a pressure regulator.
| PERFORMANCE ORDER | ||||
|
The steam separator is always filled by fuel.