FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   - 13.3. Doors
      13.3.1. Removal and installation of doors
      13.3.2. Adjustment of position of a door
      13.3.3. Removal and installation of the panel of an internal upholstery of doors
      13.3.4. Removal and installation of external handles of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a sealant of a door
      13.3.8. Removal and installation of glasses of a door
      13.3.9. Removal and mechanism installation стеклоподъемника
      13.3.10. Removal and installation of decorative lateral overlays of doors
      13.3.11. Removal and installation of decorative overlays of a frame of glasses of a door
      13.3.12. Removal and installation of external rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a luggage carrier
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation газонаполненного an emphasis of a door of a luggage carrier
      13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)
      13.3.18. Removal and installation of the lock of a cover of a luggage carrier (model Salon)
   + 13.4. External elements of a body
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


59ff046c



13.3.9. Removal and mechanism installation стеклоподъемника
THE GENERAL DATA

The mechanism стеклоподъемника приклепан to a door skeleton.

PERFORMANCE ORDER
1. To remove the panel of an internal upholstery of doors.
2. To remove пенорезиновое a covering.
3. To lift against the stop and to prop up glass.
4. To unscrew two screws of fastening of glass to стеклоподъемнику. To fix glass in the top position, having propped up it from below wooden рейкой.
5. At presence to remove a socket of the electric motor of a drive стеклоподъемника.
6. To unscrew two screws of fastening directing glasses.
7. To drill four rivets (are specified by arrows), крепящие стеклоподъемник.
8. To take стеклоподъемник through the big aperture in the internal panel of a door.
9. Installation is made in sequence, return to removal, thus it is necessary to use new rivets.