FORD SCORPIO

1985-1994 of release

Repair and car operation

13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)

PERFORMANCE ORDER

1. To open a cover of a luggage carrier and, using a marker, to lead round a loop contour on an internal surface of a cover. 2. To remove from an internal surface of a cover the decorative panel. 3. To remove sockets from the lock and the alarm switch. 4. To disconnect a plait of wires from clips and to adhere to each socket a cord of the corresponding length. To take a plait of wires from a cover, then to untie a cord and to leave it in a luggage carrier cover. 5. To unscrew four bolts (fastenings of loops are specified by arrows) and to uncover. 6. Establish a cover, having combined loops with earlier made marks, and tighten bolts of loops. To adhere to a plait of wires a cord and for a cord to involve wires in a luggage carrier cover. 7. To connect sockets to the lock and the alarm switch. 8. To establish the decorative panel and to fix it by means of clips. 9. To close a cover of a luggage carrier and to check up, that the backlash on cover perimetre was identical. If necessary it is possible to correct backlashes, having released bolts of loops and having moved a cover. 10. To tighten bolts.