FORD SCORPIO

1985-1994 of release

Repair and car operation

13.3.6. Removal and installation of the lock of a door

PERFORMANCE ORDER

1. To remove the panel of an internal upholstery of doors. 2. To remove пенорезиновое a covering around the door lock. To disconnect draught of management from the external handle. 3. To disconnect an electric socket of the electric motor of the lock of a door. For engine removal to unscrew two screws and to turn the engine for clearing of draught of management. 4. To unscrew the screw of fastening of the internal handle of a door, to shift the handle back, to remove draughts from the handle. To disconnect from the handle of draught and to take from a door directing plugs of draughts. 5. To unscrew the screw (it is specified by an arrow) fastenings of the internal handle of a door, to shift the handle back, to remove draughts from the handle. To disconnect from the handle of draught and to take from a door directing plugs of draughts. 6. In the presence of switches of the lock of a door to disconnect from them a socket. 7. To unscrew three screws (are specified by an arrow), крепящих the lock. To take the door lock through the big aperture in the internal panel of a door. 8. Installation is made in sequence, return to removal. 9. At installation to grease draughts of the internal handle in places where they pass through plastic plugs. 10. At installation of internal handles рычажок should be in the family way "openly". 11. To check up work of the lock of a door before installation of an upholstery of a door into place.