FORD SCORPIO

1985-1994 of release

Repair and car operation

5.5.6. Carburettor assemblage

PERFORMANCE ORDER

1. Carburettor assemblage is made in sequence, return to removal, with application of new linings and consolidations. 2. At installation of the case of a bimetallic spring to combine labels. 3. For check of opening air заслонки to establish the idling screw on the top step of a cam. To press the adjusting screw towards a diaphragm and to measure opening заслонки by means of a drill or a measuring core of nominal diameter. The backlash should be equal 3 mm. If necessary to spend adjustment, using 2 mm a key-shestigrannik. 4. After installation демпфера throttle заслонки the first chamber to adjust its position in скобе that between the adjusting screw of turns of idling and a control lever throttle заслонками entered щуп in the thickness of 2 mm. Плунжер демпфера should concern only приводного the lever. 5. To adjust turns of idling and quality of a mix, and if necessary – and turns of fast idling.