FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   + 13.4. External elements of a body
   - 13.5. Salon elements
      13.5.1. Removal and installation of an upholstery of a ceiling
      13.5.2. Removal and installation of an internal rear-view mirror
      13.5.3. Removal and installation of the panel of devices
      13.5.4. Removal and installation of the central console
      13.5.5. Removal and installation of the top console
      13.5.6. Removal and installation of a back shelf (model Salon)
      13.5.7. Removal and installation of forward sitting
      13.5.8. Removal and installation of seat belts of forward seats
      13.5.9. Removal and installation of seat belts of a back seat
      13.5.10. Removal and installation of back sitting
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


59ff046c



13.5.3. Removal and installation of the panel of devices
THE GENERAL DATA

Arrangement of screws of fastening of the panel of devices and separate knots of the panel

1 – the left panel of ventilation,
2 – a decorative overlay of a combination of devices,
3 – a combination of devices,
4 – the central panel of ventilation,
5 – the right panel of ventilation,
6 – the panel of devices,
7 – the bottom panel of the panel of devices,
8 – the handle of opening of a cowl

THE CARS MADE TO 04.1992 YEARS

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


2. To unscrew four screws of fastening of a decorative overlay of a combination of devices and to remove it.
3. To unscrew four screws of fastening of a combination of devices and it is a little tax forward a combination of devices from the forward panel.
4. From the back party to remove a socket of multicontact connection.

The prevention

The socket of red colour of the graphic display has a stopper which is necessary for wringing out preliminary.


5. To disconnect a cable of a drive of a speedometer for what to shift to the right the big lock ring of fixing of a cable of a speedometer to a combination of devices.
6. To take a combination of devices from the panel of devices (the arrow specifies the screw of fastening of the top part of the panel of devices access to which is possible after removal of the panel of a heater).
7. To remove the heater panel.
8. To remove the top part of the panel of devices which fastens five screws and four clips (1).
9. Strong jerk to release the top part of the panel of devices from the clamps located directly behind a windscreen.
10. To remove a rug of a soft upholstery from both parties under the panel of devices which are fixed by clips.
11. To remove the bottom panel of an upholstery from the driver's party which fastens six screws. Access to one of screws is possible only after removal of a lattice of the fan. To take a bulb of additional alarm system of the module of the alarm system of malfunctions.
12. To disconnect levers and loops of a ware box. To take axes of loops and to uncover.
13. To remove the block of auxiliary safety locks.
14. To remove block AVS and ЕSC/ЕЕС. To unscrew two nuts in a ware box.
15. To remove a radio receiver, an ashtray, the panel прикуривателя and a casing of the lever of a gear change.
16. To remove the central console.
17. To unscrew six screws of fastening of the bottom panel from outside the passenger. To remove the panel.
18. Installation is made in sequence, return to removal.

THE CARS MADE ABOUT 04.1992 YEARS

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


2. To unscrew two screws and lock clips of fastening of a decorative overlay of a combination of devices and to remove glass.
3. To unscrew four screws of fastening of a combination of devices and it is a little tax forward a combination of devices from the forward panel.
4. From the back party to remove a socket of multicontact connection.

The prevention

The socket of red colour of the graphic display has a stopper which is necessary for wringing out preliminary.


5. To disconnect a cable of a drive of a speedometer for what to shift to the right the big lock ring of fixing of a cable of a speedometer to a combination of devices.
6. To take a combination of devices from the panel of devices.
7. To remove the central console.
8. To remove a radio receiver.
9. To remove a steering wheel, the switch of indexes of turns on a steering column and the switch стеклоомывателя.
10. To remove three rotary handles (are specified by arrows) block of management of a heater, simply having pulled them on itself to get access to two screws of fastening of an overlay of the block of management of a heater.
11. To unscrew 4 screws of fastening of an overlay of the block of management, to delay a few overlay and to disconnect sockets. Completely to remove an overlay of the block of management.
12. To unscrew two screws of fastening of an overlay of the block of management. To take the block of management of a heater and to disconnect a multicontact socket.
13. To press the holder in the bottom of the handle of management and to remove the handle of the switch of light.
14. To take light switch (it is specified by an arrow) from the panel and to disconnect a socket.
15. To unscrew three screws (are specified by arrows) and to remove from the panel of devices the right ventilating panel.
16. To remove an ashtray, to unscrew three screws (fastenings are specified by arrows) and to take the ashtray case, having disconnected an illumination lamp.
17. To unscrew the screw and, having disconnected a socket, to remove прикуриватель (it is specified by an arrow) from the panel of devices.
18. To remove the left and right bottom panels under the panel of devices.
19. To unscrew three screws (are specified by arrows in drawing at the left) and to remove the handle (it is specified by an arrow in drawing on the right) cowl opening.
20. To remove a clip of fastening of a cable and to disconnect the handle from a cable.
21. To unscrew five fixing screws (are specified by arrows) to the right bottom panel of devices and to remove it.
22. To open a ware box.
23. A screw-driver to clean a clip (it is specified by an arrow) and to disconnect a loop arm.
24. To take a ware box from the panel of devices marking plastic plugs (are specified by an arrow) in rotation points.
25. To take an illumination lamp (it is specified by an arrow), to disconnect a socket and to remove it.
26. To unscrew three screws, крепящие the bottom panel (it is specified by an arrow) from outside the passenger and to remove it.
27. To pick up the top end of the decorative panel of the left rack until, clips (are specified by an arrow) will not be released yet. To lift the panel, to release bottom зацепку from a support, and to remove the panel. To repeat similar operation for the right panel.
28. To disconnect a socket (it is specified by an arrow) light-emitting diode of the emergency prevention through an aperture for a combination of devices.
29. Cautiously to wring out the ventilating panel (it is specified by an arrow) windscreen from the top part of the panel of devices, for access to the top screws of fastening of the panel of devices.
30. To unscrew screws (fastenings of the panel of devices (at the left – the left screw of fastening of the panel are specified by arrows), on the right – the top screw of fastening of the panel).
31. To unscrew nuts (fastenings of the panel of devices are specified by arrows) and partially to remove it.
32. To displace the panel of devices for access to two screws (are specified by arrows) fastenings of a suspension bracket of support.
33. To unscrew two screws supporting скобы (it is specified by an arrow) on the left side of the panel of devices and to remove скобу.
34. To check up that all clips and screws of fastening of the panel of devices are removed, and to remove the panel of devices.
35. Installation is made in sequence, return to removal.