FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   + 13.4. External elements of a body
   - 13.5. Salon elements
      13.5.1. Removal and installation of an upholstery of a ceiling
      13.5.2. Removal and installation of an internal rear-view mirror
      13.5.3. Removal and installation of the panel of devices
      13.5.4. Removal and installation of the central console
      13.5.5. Removal and installation of the top console
      13.5.6. Removal and installation of a back shelf (model Salon)
      13.5.7. Removal and installation of forward sitting
      13.5.8. Removal and installation of seat belts of forward seats
      13.5.9. Removal and installation of seat belts of a back seat
      13.5.10. Removal and installation of back sitting
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


59ff046c



13.5.7. Removal and installation of forward sitting
PERFORMANCE ORDER
1. To shift a seat against the stop back, then to unscrew two bolts of fastening of a forward part of sitting (one of bolts is specified by an arrow).
2. Disconnect an auxiliary spring from under a driver's seat (sitting moving forward will weaken a spring tension, but access to it thus becomes complicated).
3. To disconnect sockets of a heater of sitting and engines of adjustment of position of seats.
4. To shift a seat against the stop forward and to unscrew three bolts. These bolts are closed заглушкой (it is specified by an arrow in drawing 1) and a cover (is specified by an arrow in drawing 2).
5. To remove a seat together with the mechanism of adjustment of position of seats and a seat belt buckle.
6. Installation is made in sequence, return to removal.

Removal and installation of an air cushion of a forward seat

PERFORMANCE ORDER
1. To remove a forward seat.
2. To remove a lateral covering from a seat. To remove an air tube, having unscrewed two screws of fastening.
3. To separate a back from the seat basis, having unscrewed four bolts.
4. To remove a back upholstery, having unbent keeping ears and having pulled together it.
5. To remove a porous lining. To cut off wire loops of fastening of corners of a pillow and to remove it together with air hoses.
6. Installation is made in sequence, return to removal. Thus it is necessary to use new wire rings.
7. To establish cuts in a pillow at level with the second spring in a back.