FORD SCORPIO

1985-1994 of release

Repair and car operation

7.3.2.13.1. Cars with the electromagnetic valve

THE GENERAL DATA

Elements of adjustment of a cable of the mechanism kick-down on cars with the electromagnetic valve

And – the electromagnetic valve, In – the case, With – the holder, D – a bolt of fastening, Е – a spherical finger of connection of a cable

PERFORMANCE ORDER

1. To establish the lever of a choice of transfers to any position, to include ignition (without starting the engine), to press against the stop a pedal of an accelerator and to fix it in this position. 2. To turn counter-clockwise to the full the lever of 5 switchings on the lowest transfer and to establish on a cable a template 17.031 for an exception of a retension of a cable. 3. To weaken bolts of 4 fastenings of an arm of the electromagnetic valve and to move the electromagnetic valve forward to an easy tension of a cable of switching, then to tighten bolts. 4. If adjustment is executed correctly, the electromagnetic valve at giving on it pressure should pull a cable and, turning the lever of 5 switchings clockwise against the stop, to keep it in this position. 5. In case of a retension of a cable of switching the electromagnetic valve is not established in demanded position that leads to return of the lever of switching to a starting position. 6. In case of an insufficient tension of a cable of switching the switching lever is established in demanded position, however there is an overheat of the electromagnetic valve that leads to return of the lever to a starting position. 7. In both cases it is necessary to make repeated adjustment.